About DVD - V

What's a dual-layer disc? Will it work in all players?

A dual-layer disc has two layers of data, one of them semi-transparent so that the laser can focus through it and read the second layer. Since both layers are read from the same side, a dual-layer disc can hold almost twice as much as a single-layer disc, typically 4 hours of video (see 3.3 for more details). Many discs use dual layers. Initially only a few replication plants could make dual-layer discs, but most plants now have the capability. The second layer can use either a PTP (parallel track path) layout where both tracks run in parallel (for independent data or special switching effects), or an OTP (opposite track path) layout where the second track runs in an opposite spiral; that is, the pickup head reads out from the center on the first track then in from the outside on the second track. The OTP layout, also called RSDL (reverse-spiral dual layer), is designed to provide continuous video across both layers. When the laser pickup head reaches the end of the first layer it changes focus to the second layer and starts moving back toward the center of the disc. The layer change can occur anywhere in the video; it doesn't have to be at a chapter point. There's no guarantee that the switch between layers will be seamless. The layer change is invisible on some players, but it can cause the video to freeze for a fraction of a second or as long as 4 seconds on other players. The "seamlessness" depends as much on the way the disc is prepared as on the design of the player. The advantage of two layers is that long movies can use higher data rates for better quality than with a single layer.

There are various ways to recognize dual-layer discs: 1) the gold color, 2) a menu on the disc for selecting the widescreen or fullscreen version, 3) two serial numbers on one side.

The DVD specification requires that players and drives read dual-layer discs. There are very few units that have problems with dual-layer discs--this is a design flaw and should be corrected for free by the manufacturer. Some discs are designed with a "seamless layer change" that technically goes beyond what the DVD spec allows. This causes problems on a few older players.

All players and drives also play double-sided discs if you flip them over. No manufacturer has announced a model that will play both sides, other than a few DVD jukeboxes. The added cost would be hard to justify since discs can hold over 4 hours of video on one side by using two layers. (Early discs used two sides because dual-layer production was not widely supported. This is no longer a problem.) Pioneer LD/DVD players can play both sides of a laserdisc, but not a DVD.

Is DVD-Video a worldwide standard? Does it work with NTSC, PAL, and SECAM?

Video on a DVD is stored in digital format, but it's formatted for one of two mutually incompatible television systems: 525/60 (NTSC) or 625/50 (PAL/SECAM). Therefore, there are two kinds of DVDs: "NTSC DVDs" and "PAL DVDs." Some players only play NTSC discs, others play PAL and NTSC discs. Discs are also coded for different regions of the world . NTSC is the TV format used in Canada, Japan, Mexico, Philippines, Taiwan, United States, and other countries. PAL is the TV format used in most of Europe, most of Africa, China, India, Australia, New Zealand, Israel, North Korea, and other countries. (See the chart at www.remoteviewing.com for a complete list.)

Almost all DVD players sold in PAL countries play both kinds of discs. These multi-standard players partially convert NTSC to a 60-Hz PAL (4.43 NTSC) signal. The player uses the PAL 4.43-MHz color subcarrier encoding format but keeps the 525/60 NTSC scanning rate. Most modern PAL TVs can handle this "pseudo-PAL" signal. A few multi-standard PAL players output true 3.58 NTSC from NTSC discs, which requires an NTSC TV or a multi-standard TV. Some players have a switch to choose 60-Hz PAL or true NTSC output when playing NTSC discs. There are a few standards-converting PAL players that convert from an NTSC disc to standard PAL output for older PAL TVs. Proper "on the fly" standards conversion requires expensive hardware to handle scaling, temporal conversion, and object motion analysis. Because the quality of conversion in DVD players is poor, using 60-Hz PAL output with a compatible TV provides a better picture than converting from NTSC to PAL. (Sound is not affected by video conversion.)

Most NTSC players can't play PAL discs, and most NTSC TVs don't work with PAL video. A very small number of NTSC players (such as Apex and SMC) can convert PAL to NTSC. External converter boxes are also available, such as the Emerson EVC1595 ($350). High-quality converters are available from companies such as TenLab and Snell and Wilcox.
Beware, some standards-converting players can't convert anamorphic widescreen video for 4:3 displays
The latest software tools such as Adobe After Effects and Canopus ProCoder do quite a good job of converting between PAL and NTSC at low cost, but they are only appropriate for the production environment (converting the video before it is encoded and put on the DVD). See Snell and Wilcox's The Engineer's Guide to Standards Conversion and The Engineer's Guide to Motion Compensation for technical details of conversion.

There are three differences between discs intended for playback on different TV systems: picture dimensions and pixel aspect ratio (720x480 vs. 720x576), display frame rate (29.97 vs. 25), and surround audio options (Dolby Digital vs. MPEG audio). Video from film is usually encoded at 24 frames/sec but is preformatted for one of the two required display rates. Movies formatted for PAL display are usually sped up by 4% at playback, so the audio must be adjusted accordingly before being encoded. All PAL DVD players can play Dolby Digital audio tracks, but not all NTSC players can play MPEG audio tracks. PAL and SECAM share the same scanning format, so discs are the same for both systems. The only difference is that SECAM players output the color signal in the format required by SECAM TVs. Note that modern TVs in most SECAM countries can also read PAL signals, so you can use a player that only has PAL output. The only case in which you need a player with SECAM output is for older SECAM-only TVs.

A producer can choose to put 525/60 NTSC video on one side of the disc and 625/50 PAL on the other. Most studios put Dolby Digital audio tracks on their PAL discs instead of MPEG audio tracks.
Because of PAL's higher resolution, the video usually takes more space on the disc than the NTSC version.

There are actually three types of DVD players if you count computers. Most DVD PC software and hardware can play both NTSC and PAL video and both Dolby Digital and MPEG audio. Some PCs can only display the converted video on the computer monitor, but others can output it as a video signal for a TV.
Bottom line: NTSC discs (with Dolby Digital audio) play on over 95% of DVD systems worldwide. PAL discs play on very few players outside of PAL countries.